When you shop for a new air conditioner, every quote lists a SEER2 number, and the price climbs with it. It’s fair to ask whether paying more for a higher rating actually makes sense. In South Florida, where an AC can run most months of the year, efficiency matters more than in most of the country. But the highest number isn’t automatically the best buy.
Here’s what SEER2 means, the minimum allowed in Florida, and how to decide what’s right for your home.
What is SEER2?
SEER stands for Seasonal Energy Efficiency Ratio: how much cooling a system delivers for each unit of electricity over a typical season. SEER2 is the updated version of that test, which the U.S. Department of Energy adopted for equipment made from January 1, 2023. The new test uses higher static pressure to better reflect real ductwork, so SEER2 numbers come out a little lower than the old SEER numbers for the same equipment. A system once rated 15 SEER is roughly 14.3 SEER2.
The higher the SEER2, the less electricity the system uses for the same amount of cooling.
Minimum SEER2 in Florida
Florida is in the Department of Energy’s Southeast region, which has higher minimums than northern states. For new central split-system equipment installed in Florida:
| System type | Minimum efficiency |
|---|---|
| Split AC under 45,000 BTU (under about 3.75 tons) | 14.3 SEER2 |
| Split AC 45,000 BTU and above | 13.8 SEER2 |
| Split heat pump | 14.3 SEER2 and 7.5 HSPF2 |
Your contractor should only offer equipment that meets these minimums. If you see an older “14 SEER” system quoted for a Florida install, ask questions.
Is higher SEER2 worth it in Palm Beach County?
Because South Florida systems run so many hours, the savings from higher efficiency add up faster here than in milder climates. But savings depend on several things:
- How much you run the AC. A home kept at 74°F year-round benefits more than a seasonal condo.
- How long you’ll stay. Payback on a premium system can take years.
- Your ductwork. A high-efficiency unit connected to leaky or undersized ducts won’t deliver its rated performance.
- Correct sizing and installation. These matter as much as the rating. See common AC installation mistakes.
A practical way to choose
Around 14.3 to 15 SEER2
The minimum or close to it. A reasonable choice for rentals, homes you plan to sell soon, or tighter budgets. Usually single-stage equipment.
Around 16 to 17 SEER2
The sweet spot for many Palm Beach County homeowners. Often two-stage equipment, which runs on a lower setting most of the time. That means longer, gentler cycles and noticeably better humidity control, which matters in Florida.
18 SEER2 and above
Usually variable-speed (inverter) systems. The most efficient and the best at dehumidifying and keeping temperatures even, and also the most expensive to buy and repair. Worth considering if you plan to stay long-term and keep the house cool year-round.
Comfort matters too, not just the bill
In our climate, the biggest everyday difference you’ll notice from two-stage and variable-speed systems is often comfort: less humidity, fewer temperature swings, and quieter operation. If your current home feels sticky even with the AC running, read AC humidity problems.
Other ratings you’ll see on quotes
- EER2: efficiency at a single hot condition (95°F outdoors). Useful in Florida because so many hours are hot.
- HSPF2: heating efficiency for heat pumps. Matters less in South Florida but still counts on cool winter mornings. See heat pump vs. air conditioner.
- ENERGY STAR: a label for equipment that beats the federal minimum by a set margin.
Check for rebates and credits
Utility rebates and federal tax incentives for high-efficiency equipment change from year to year. Before you buy, check FPL’s current programs and the IRS’s current energy-efficiency guidance, or ask us what applies at the time of your installation.
Frequently asked questions
What’s the difference between SEER and SEER2?
SEER2 uses a newer, tougher test that better reflects real homes. The same unit will show a slightly lower SEER2 number than its old SEER rating.
What SEER2 should I buy in Florida?
For many homeowners staying several years, around 16 to 17 SEER2 balances cost, savings and humidity control well. We’ll recommend a range after looking at your home and ducts.
Will a higher SEER2 fix high power bills?
It helps, but duct leaks, attic heat and thermostat habits can matter as much. See our tips to lower your FPL bill.
Get an honest replacement quote
We size every system with a load calculation and explain the trade-offs between efficiency levels, with no pressure to upsell. Cold Chillin Air Conditioning is licensed (CAC 1823036) and installs systems across Boynton Beach and Palm Beach County. Call (561) 318-1882 or request a free installation estimate. Learn more about our AC installation service and typical installation costs in Palm Beach County.

